Shelving

Posts Tagged ‘Series’

Lyon KK1031 1000 Series Standard Storage Cabinet with 4 Shelves, 48″ Width x 24″ Depth x 78″ Height, 2000 lbs Capacity, Black

• A virtual storeroom of space – can hold 2000 pounds of parts, stationery, literature or supplies
• Double pan door reinforcement for added strength and 3 piece welded shelf reinforcement that boosts load capacity to 325 lbs per shelf
• Four adjustable shelves, fixed bottom shelf
• Cabinet measures 48″ width by 24″ depth by 78″ height
• Product ships flat and assembly is needed

Material is best quality, cold rolled, mild annealed, sheet steel, free from buckle, loose scale or other surface imperfections. Finish all sheet steel parts are to be thoroughly cleaned before finish is applied. Finish shall be baked on at a temperature of not less than 300 degree fahrenheit and must withstand a rigid hammer test without flaking. The right hand door shall be equipped with a 3-point locking mechanism that engages slots provided in top and bottom cross channels and in left hand d

List Price: $ 838.55

Price:

Lyon DD1123 All Welded Steel Shelf/Bin Cabinet, 36″ Width x 21″ Depth x 82″ Height, Dove Gray

• Includes 3 full width shelves adjustable on 3″ centers
• 16 Large (8-1/4″ width by 14-3/4″ depth by 7″ height) plastic parts bins inside cabinet
• Set up means product ships fully assembled
• Measures 36″ width by 21″ depth by 82″ height
• Product ships fully assembled

Removable plastic parts bins increase storage density, speed selection and retrieval. Corrosion resistant, and impervious to most solvents, safety yellow plastic bins easily clip on and off racks welded to cabinets and doors. All welded 14 gauge steel construction delivers secure storage behind heavy-gauge steel doors. Evenly distributed load capacity is 1450 lbs per shelf. 3 Point locking system featuring 3/8″ latch rods and 3/16″ latch plates. Additional shelves can be added for increased vers

List Price: $ 1,682.85

Price:

Traditional Series Four Tier Locker – 1 Section (Assembled) Color: Gray, Dimensions (W x D x H): 12 x 15 x 66

11-141215661-25 Color: Gray, Dimensions (W x D x H): 12 x 15 x 66 The visually appealing and very durable Traditional Collection is our most widely distributed locker line. Offering the most value for typical locker applications, this collection is available in a full range of spacious sizes, from single- to six-tier configurations, as well as two-person, sixteen-person and wall-mounted. Featuring 16 gauge doors, frames and bottoms and 24 gauge tops, sides, backs and shelves, all Traditional loc

Price:

Related Shelving For School Lockers Products

Lyon PP1031 1000 Series Standard Storage Cabinet with 4 Shelves, 48″ Width x 24″ Depth x 78″ Height, 2000 lbs Capacity, Putty

• A virtual storeroom of space – can hold 2000 pounds of parts, stationery, literature or supplies
• Double pan door reinforcement for added strength and 3 piece welded shelf reinforcement that boosts load capacity to 325 lbs per shelf
• Four adjustable shelves, fixed bottom shelf
• Cabinet measures 48″ width by 24″ depth by 78″ height
• Product ships flat and assembly is needed

Material is best quality, cold rolled, mild annealed, sheet steel, free from buckle, loose scale or other surface imperfections. Finish all sheet steel parts are to be thoroughly cleaned before finish is applied. Finish shall be baked on at a temperature of not less than 300 degree fahrenheit and must withstand a rigid hammer test without flaking. The right hand door shall be equipped with a 3-point locking mechanism that engages slots provided in top and bottom cross channels and in left hand d

List Price: $ 838.55

Price:

Related Steel Shelving For Wood Storage Products

Lyon BB1099 1000 Series Combination Wardrobe Cabinet with 1 Full Shelf and 4 Half Shelves, Steel, 36″ Width x 24″ Depth x 78″ Height, Wedgewood Blue

• Combines office supplies/package storage and wardrobe facilities
• One full width shelf at top for packages and hats
• Balance of cabinet divided for supplies and full length clothing storage
• Cabinet measures 36″ width by 24″ depth by 78″ height
• 4 Side shelves with 2″ adjustability and 5 compartments maximize storage space; extra half shelves are also available
• Product ships flat and assembly is needed

Material is best quality, cold rolled, mild annealed, sheet steel, free from buckle, loose scale or other surface imperfections. All sheet steel parts are to be thoroughly cleaned before finish is applied. Finish shall be baked on at a temperature of not less than 300 degree fahrenheit and must withstand a rigid hammer test without flaking. Hinges must be 2″ high, 16-gauge steel and 5 knuckles. Hinge pin to be spun flush both ends to prevent removal. Hinge to be set in slot in front mullion of s

List Price: $ 743.15

Price:

Lyon PP1099 1000 Series Combination Wardrobe Cabinet with 1 Full Shelf and 4 Half Shelves, Steel, 36″ Width x 24″ Depth x 78″ Height, Putty

• Combines office supplies/package storage and wardrobe facilities
• One full width shelf at top for packages and hats
• Balance of cabinet divided for supplies and full length clothing storage
• Cabinet measures 36″ width by 24″ depth by 78″ height
• 4 Side shelves with 2″ adjustability and 5 compartments maximize storage space; extra half shelves are also available
• Product ships flat and assembly is needed

Material is best quality, cold rolled, mild annealed, sheet steel, free from buckle, loose scale or other surface imperfections. All sheet steel parts are to be thoroughly cleaned before finish is applied. Finish shall be baked on at a temperature of not less than 300 degree fahrenheit and must withstand a rigid hammer test without flaking. Hinges must be 2″ high, 16-gauge steel and 5 knuckles. Hinge pin to be spun flush both ends to prevent removal. Hinge to be set in slot in front mullion of s

List Price: $ 743.15

Price:

Lyon DD1099 1000 Series Combination Wardrobe Cabinet with 1 Full Shelf and 4 Half Shelves, Steel, 36″ Width x 24″ Depth x 78″ Height, Dove Gray

• Combines office supplies/package storage and wardrobe facilities
• One full width shelf at top for packages and hats
• Balance of cabinet divided for supplies and full length clothing storage
• Cabinet measures 36″ width by 24″ depth by 78″ height
• 4 Side shelves with 2″ adjustability and 5 compartments maximize storage space; extra half shelves are also available
• Product ships flat and assembly is needed

Material is best quality, cold rolled, mild annealed, sheet steel, free from buckle, loose scale or other surface imperfections. All sheet steel parts are to be thoroughly cleaned before finish is applied. Finish shall be baked on at a temperature of not less than 300 degree fahrenheit and must withstand a rigid hammer test without flaking. Hinges must be 2″ high, 16-gauge steel and 5 knuckles. Hinge pin to be spun flush both ends to prevent removal. Hinge to be set in slot in front mullion of s

List Price: $ 743.15

Price:

More Steel Shelving For Wood Storage Products

Lyon PP8005SGLV 8000 Series Open Shelving Starter with 5 Galvanized Shelves, 36″ Width x 12″ Depth x 84″ Height, Putty

• 18 Gauge traditional flanged shelves afford 750 lbs capacity
• Applicable for galvanized, high humidity, unheated storage; storage of solvents, oily or greasy parts
• T-Post shelving upright
• Shelves are adjustable on 1-1/2″ centers
• Available in Putty color

Galvanized shelves deliver exceptional value and long life in harsh environments. For double row, back-to-back installations, use economical open back shelving on one side. Open shelves: high visibility is ideal for storing packaged stock and other material without assigned shelf locations. Lapped and welded shelf corners provide added strength and durability. Shelf clips: quickly lock into place, on either side of uprights. Disengages easily to re-position shelves, no tools needed. T-post uprig

List Price: $ 280.55

Price:

Lyon PP8005SM 8000 Series Open Shelving Starter with 5 Medium Duty Shelves, 36″ Width x 12″ Depth x 84″ Height, Putty

• 22 Gauge medium duty, “Box W” shelves offer 600 lbs capacity for storage of aerosols, tools, drills, safety supplies
• Applicable for industrial, all purpose standard and heavy duty storage
• T-Post shelving upright
• Shelves are adjustable on 1-1/2″ centers
• Available in Putty color

22 Gauge medium duty with front and rear “Box W” formation. The front and rear “Box W” formation is not less than 1-11/64″ x 2-7/32″ x 1-1/8″ with a 9/16″ return flange spot welded to bottom surface of the shelf. The 2-7/32″ portion of the “Box W” formation shall have a 10 degree bend in the center for additional strength and rigidity. The front and rear flanges of the shelf shall be punched to accept bin fronts, label holders and other accessories. Ends are to be flanged not less than 1-11/64″

List Price: $ 247.30

Price:

Lyon PP8005 8000 Series Open Shelving Add-On with 5 Traditional Shelves, 36″ Width x 12″ Depth x 84″ Height, Putty

• 18 Gauge traditional flanged shelves afford 750 lbs capacity for electrical fittings, clamps, bearings
• Applicable for industrial, all purpose standard and heavy duty storage
• T-Post shelving upright
• Shelves are adjustable on 1-1/2″ centers
• Available in Putty color

18 Gauge traditional with front and rear flanged down not less than 1-11/64″ with return flange of not less than 3/8″ at approximately 10 degrees, and punched to accommodate label holder and accessories. Ends are to be flanged not less than 1-11/64″ with a 90 degree return flange of not less than 5/8″. All shelves punched on 3″ centers for divider adjustment. The front and rear flanges are to be embossed with 18 GA. Shelving unit for double row, back-to-back installations, use economical open ba

List Price: $ 221.35

Price:

Lyon PP8074SH 8000 Series Open Shelving Starter with 8 Heavy Duty Shelves, 42″ Width x 18″ Depth x 84″ Height, Putty

• Greater lateral clearance yields more shelf space for long, unwieldy items and offers more flexibility for storing packaged stock and all purpose standard and heavy duty storage
• Both 42″ and 48″ wide sections integrate with comparable 36″ wide 8000 series units, and with each other
• Lyon T-Post uprights and box W shelf design
• Maximum capacity per shelf 8000 lbs
• Available in Putty color

PP8074SH Color: Putty, Section Type: Starter (4 posts) Improve your storage area or warehouse with the industry standard Lyon 8000 Series Shelving. This shelving unit provides high visibility which is ideal for storing packaged stock, and other material. Its lapped and welded shelf corners provide added strength and durability. Features: -8 shelves -Lyon Shelf Clips disengage easily to re-position shelves -Patented design T-post uprights -Shelves adjust on 1 1/2” centers -Overall Dimensions:84′

List Price: $ 459.75

Price:

More Home Office Shelving Products

Lyon PP1096 1000 Series Wardrobe Cabinet with 1 Full Shelf and Coatrod, Steel, 36″ Width x 24″ Depth x 78″ Height, Putty

• Full width shelf at top for hats and packages
• Coat rod below shelf can hold 8 to 15 bulky coats on hangers
• Interior is completely finished no sharp edges to damage clothing
• Cabinet measures 36″ width by 24″ depth by 78″ height
• Wardrobe shelf is adjustable every 2″
• Product ships flat and assembly is needed

Material is best quality, cold rolled, mild annealed, sheet steel, free from buckle, loose scale or other surface imperfections. All sheet steel parts are to be thoroughly cleaned before finish is applied. Finish shall be baked on at a temperature of not less than 300 degree fahrenheit and must withstand a rigid hammer test without flaking. Hinges must be 2″ high, 16-gauge steel and 5 knuckles. Hinge pin to be spun flush both ends to prevent removal. Hinge to be set in slot in front mullion of s

List Price: $ 593.30

Price:

Related Steel Shelving For Wood Storage Products

Lyon PP8005M 8000 Series Open Shelving Add-On with 5 Medium Duty Shelves, 36″ Width x 12″ Depth x 84″ Height, Putty

• 22 Gauge medium duty, “Box W” shelves offer 600 lbs capacity for storage of aerosols, tools, drills, safety supplies
• Applicable for industrial, all purpose standard and heavy duty storage
• T-Post shelving upright
• Shelves are adjustable on 1-1/2″ centers
• Available in Putty color

22 Gauge medium duty with front and rear “Box W” formation. The front and rear “Box W” formation is not less than 1-11/64″ x 2-7/32″ x 1-1/8″ with a 9/16″ return flange spot welded to bottom surface of the shelf. The 2-7/32″ portion of the “Box W” formation shall have a 10 degree bend in the center for additional strength and rigidity. The front and rear flanges of the shelf shall be punched to accept bin fronts, label holders and other accessories. Ends are to be flanged not less than 1-11/64″

List Price: $ 188.10

Price: